DESILTERS / DESANDERS
Desilters and Desanders are used to process large volumes of drilling fluid to remove abrasive sands and silts that shale shakers cannot remove.
DFE Desilting and Desanding hydrocyclones are made from high density abrasion resistant polyurethane. The unique internal manifold design minimises the back pressure on the hydrocyclones maximising the solids removal.
Fine tuning is achieved through adjustable orifice openings at the discharge point on the cone.
Both Desilters and Desanders are available in a large range of configurations including stand alone, over a shaker as a mud cleaner or packaged with a supply pump as a mobile desilting unit.
Desander Specification:
Desander Cone Design: 10" or 12" High Density Polyurethane
Unit Capacity: 10" - 500, 1000, 1500 GPM, 12" - 600, 1200, 1800 GPM
Manifold Pipe: 8" or 10" Shed 40 Line Pipe
Feed and Exit connection Type: 8" or 10" NB Victaulic Connection Clamp
Hydrocyclone connection: 5" Victaulic clamp. Clamps included
Inlet manifold Pressure Gauge: 0 - 100 PSI S/S liquid filled
Painting: Bead Blasted to SA 2.5 (white metal), Zinc rich Primer Undercoat, Aliphatic Urethan Acrylic Top coat
Other Features: Underflow catch tray, mounting stand, flanged discharge connection option, all can be customised on request.
Desilter Specification:
Desander Cone Design: 4" or 5" High Density Polyurethane
Unit Capacity: 4" - 100 through 1000 GPM, 5" - 150 through 1500 GPM
Manifold Pipe: 8" or 10" Shed 40 Line Pipe
Feed and Exit connection Type: 8" or 10" NB Victaulic Connection Clamp
Hydrocyclone connection: 2" Victaulic clamp. Clamps included
Inlet manifold Pressure Gauge: 0 - 100 PSI S/S liquid filled
Painting: Bead Blasted to SA 2.5 (white metal), Zinc rich Primer Undercoat, Aliphatic Urethan Acrylic Top coat
Other Features: Underflow catch tray, mounting stand, flanged discharge connection option, all can be customised on request.
